Vidar Design Flooring is a leading flooring supplier that offers a variety of sizes, colours and kinds of high quality hardwood flooring to satisfy all customer needs.
Our company keeps growing bigger in showrooms and warehouse facilities in Toronto, Montreal, and Vancouver areas, with further expansion into Calgary in the near future.

For decades, Canadian families have trusted VIDAR floors to bring the beauty of nature into their homes—where raw timber meets refined craftsmanship. Each plank carries the story of North America’s great oak forests, shaped by crisp northern air and time-honored skill. This legacy, rooted in strength and shaped by the land, now continues in your space. More than just flooring, it’s generations of woodland wisdom beneath your feet—grounding every step with natural elegance.

Baltic birch plywood is no wonder the most stable option for hardwood floors. First of all, Baltic birch has superior screw holding ability because the core veneers are birch so the screws can bite and hold with 100% of their threads. Secondly, it’s the clean joinery. With no voids between cores, there are no glue starvation and you will get full glue coverage. Thus, you can use it for a long lasting time. Last but not least, its extraordinary strength and stability. Birch grows in the frigid zone which makes its growth cycle longer than other lumbers and with high density.

Our moisture control process is very strict and precise. There are four steps when we do the moisture control on plywood. First of all, logs need to be air dried for several months to release the inner stress after harvest. Secondly, in order to dry the veneers at MC: 8+-2%, We are using a 40 meter oven dryer with high temperature to roll all the thin and soft rotary veneers. Thirdly, the hot press. After veneers are glued to each other, we are going to hot press them and the moisture will be back at a low level of 6-8%. But the only problem is that moisture level on different part of the plywood is not equivalent which leads us to the next step.

Finally, we are going to put veneers into the moisture balance Kiln facility. During this time, each piece of veneer is isolated to ensure the circulation of steam. Based on our experience, we've controlled the moisture rate of the hardwood very well that the flooring can be used stably in most part of the world especially our warehouses locations.